Gardínuliði 4f.
Blind actuators with integrated bus coupler, manual activation, and status
display for each output. For controlling electrically operated blinds,
shutters, awnings, ventilation flaps, or similar hangings.
Features:
- Curtain position can be directly controlled.
- Slat position can be directly controlled.
- Behaviour after bus voltage failure and recovery can be set.
- Separately parameterizable movement times with movement time extension for
moving into the upper end position.
- Central control of all blind outputs possible.
- Feedback on the curtain or slat position.
- Feedback can be delayed until after the recovery of bus voltage.
- Assignments of up to five different safety functions (three wind alarms, one
rain alarm, one frost alarm) or optionally with cyclical monitoring.
- Forced setting function can be realised for each blind output.
- Integration in scenes is possible, 8 internal scenes at the most can be
parameterised per channel.
- Memory function for light scenes.
- Solar protection function with fixed and variable curtain or slat positions
can be activated.
- Extended sun protection with extensive control functions.
- Integration in temperature management of building possible.
- Blocking of individual outputs manually or with bus.
- Active or passive (object can be read out) cyclical feedback functions.
- Building site operation: Outputs can be operated manually without bus
voltage with operating voltage only.
- For mains voltage AC 230 V.
- Connection of various external conductors.
- Independent control of the two blind outputs.
- Automatic detection of hanging travel time for AC 230 V drives with
mechanical limit switches.
Technical data:
KNX medium: TP256
Connections
- KNX: Connection and junction terminal
- Load: Screw terminals
Rated voltage: AC 230 V, 50/60 Hz
AC switching voltage: AC 230 V, 50/60 Hz
Breaking capacity 230 V AC: 6 A/AC1
Switching voltage DC: DC 12 to 48 V
Switching capacity
- DC 12/24 V: 6 A
- DC 48 V: 3 A
Connection cross section: Max. 4 mm²
Notes:
- Installation on DIN top-hat rail.
Scope of supply:
- Connection and junction terminal for KNX included in the scope of supply.
Dimensions:
Modular width (MW): 4
